B2k updates?
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
B2k updates?
We’ve had several members acquire new-to-them b2ks in the last few months....any updates on them?
-
- Guest
- Posts: 9
- Joined: Wed Dec 20, 2017 1:30 pm
Re: B2k updates?
Callaway 89-021 has just begun its check up. Pulled the intake for porting, new gaskets, plugs, wires, adjustable fuel pressure regulator, egr delete, air pump delete, new injectors, turbo's being sent out to be rebuilt, wonder bar installation, 3" exhaust into megaphones, tuning. The car has only 10k miles and looks to have never been apart so a through check up was needed.
-
- 4-PSI
- Posts: 30
- Joined: Sun Feb 11, 2018 3:38 pm
Re: B2k updates?
I finally got Callaway 89-046 moving under its own power and on the streets for the first time since 2007. It runs well, but is throwing some codes I need to diagnose and the speedo is reading zero. So now I need to work through these issues with the speedo being the first to tackle. Hoping it is not the instrument cluster.
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: B2k updates?
Even more new B2k owners!!
What are you guys doing to your new rides?
What are you guys doing to your new rides?
- Dakota Aero
- VIP COG Brother
- Posts: 759
- Joined: Fri Nov 28, 2008 10:24 pm
- Location: Black Hills
Re: B2k updates?
Mine's not a new ride but with mmt in the gas oil change new air filter big exhaust no cats a ZL1 Camaro convertible tried but could not keep up today. I went to a hundred and five in 3rd gear and he backed way off
DA
DA
- Arctic91
- 7-PSI
- Posts: 105
- Joined: Sat Jun 18, 2016 4:23 pm
Re: B2k updates?
Sounds like a beast! As beautiful as it is fast!Dakota Aero wrote: ↑Sun Jul 28, 2019 7:00 pm Mine's not a new ride but with mmt in the gas oil change new air filter big exhaust no cats a ZL1 Camaro convertible tried but could not keep up today. I went to a hundred and five in 3rd gear and he backed way off
DA
Scott
Scott
89 CTTC #027 (Black/Black Aerobody Coupe)
90 ZR-1 #2547 (Turquoise Metallic/Black)
92 SNAT 400 (Polo Green/Beige Convertible)
95 SNAT 450 (Black/Black Aerobody Coupe)
91 ZR-1 #1231 (Arctic White/Saddle) - SOLD
89 CTTC #027 (Black/Black Aerobody Coupe)
90 ZR-1 #2547 (Turquoise Metallic/Black)
92 SNAT 400 (Polo Green/Beige Convertible)
95 SNAT 450 (Black/Black Aerobody Coupe)
91 ZR-1 #1231 (Arctic White/Saddle) - SOLD
- Dakota Aero
- VIP COG Brother
- Posts: 759
- Joined: Fri Nov 28, 2008 10:24 pm
- Location: Black Hills
Re: B2k updates?
Thinking about this maybe he backed off due to the speed in town, not that he couldn't keep up or pass! Zl-1 has a sub 4 zero to sixty! I know DA is quick but not sure it is that quick!?
DA
DA
-
- 4-PSI
- Posts: 30
- Joined: Sun Feb 11, 2018 3:38 pm
Re: B2k updates?
Took 89-046 to a small car show at Arnold AFB in Tn. Lots of comments like, “this like seeing a unicorn. You have heard of them but never saw one so they can’t really exist.”
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: B2k updates?
That’s awesome! Looking great...is she all sorted now?
-
- VIP COG Brother
- Posts: 388
- Joined: Wed Aug 27, 2008 8:12 pm
Re: B2k updates?
Looks Great!
-
- 4-PSI
- Posts: 30
- Joined: Sun Feb 11, 2018 3:38 pm
Re: B2k updates?
Surf - No I still don't have it all sorted out. I don't know who to trust with the A/C. There is so much of the dash to remove (my guess) and everything being 30+ year old plastic that is showing cracks already around attachment screws really concerns me. If I could do the work myself then at least I could blame myself - I just have no experience and the right tools to do an a/c repair/replace and convert to new refrigerants. I did buy an Intellitronix GPS based speedometer input that will match the signal sent by the original transmission tail shaft sending unit in cycles per mile. I also ordered a new Idle Air Control Valve to install to hopefully fix the idle issues. This would be my second, but I did not have the more explicit instructions on "how to install" at that time. I just have not found time to get back and work on it. Summer is hard, too many things that demand attention, but not having the A/C limits the amount I want to drive the car. Black interior in TN hot and humid weather.
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: B2k updates?
Whats going on here gang? Anyone working on their cars in the winter months?
-
- 4-PSI
- Posts: 25
- Joined: Wed Apr 09, 2014 11:30 pm
Re: B2k updates?
I have mine pretty well sorted out at this point, so it doesn't currently need much work, but I did change the oil last week. Waiting for spring here in MN so I can have fun with it again.
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: B2k updates?
That's awesome. A well sorted b2k is a great thing!
- Peaven
- 4-PSI
- Posts: 42
- Joined: Sun Jul 21, 2019 12:18 am
Re: B2k updates?
Did get the starter replaced in 1988 #48 late 2019. Otherwise not much activity in my garage over the winter months except the use of the battery tender, still waiting for it to get a little warmer to try and tackle the oil leak.
- SurfnSun
- Site Admin
- Posts: 2331
- Joined: Wed Aug 27, 2008 9:44 pm
- Location: Central FL
- Contact:
Re: B2k updates?
Good stuff!! Been a while coming. Did you put a heat shield on it?
- Peaven
- 4-PSI
- Posts: 42
- Joined: Sun Jul 21, 2019 12:18 am
Re: B2k updates?
Yessir, it has...I did put a wrap around it, works great! Also replaced the passenger door outside window trim but that damned oil leak is bugging the hell out of me, don't want to drive it until it's tight. Once it gets >60 in the garage I'll try again, one thing at a time...
- Peaven
- 4-PSI
- Posts: 42
- Joined: Sun Jul 21, 2019 12:18 am
Re: B2k updates?
Managed to find some time to pull the oil filter adapter, now just waiting for a couple of o-rings from Wayne before cleaning her up and finishing it this weekend...