Callaway Viper Info:

A discussion Forum for all other Callaway Vehicles and Projects, including the Callaway SportTrucks and SUVs, Callaway Camaros, and Cadillac CTS-V Series Automobiles, plus historic VW, Mercedes, Porsche, Alfa Romeo and many more including the Callaway Bump-Up Kits
Post Reply
Callaway Chris
VIP COG Brother
VIP COG Brother
Posts: 3878
Joined: Wed Aug 27, 2008 4:46 pm
Location: Old Lyme, CT
Contact:

Callaway Viper Info:

Post by Callaway Chris »

I thought this would be of interest:
Here are the details about the SuperNatural® package from Callaway’s promotional materials:

Callaway Viper 440 Six-Pack
0-60 in 4.1 seconds
Quarter Mile in 12.5 seconds @ 115 mph

Callaway Cars is pleased to introduce the first SuperNatural® package for the Dodge Viper, the Callaway Viper 440 Six-Pack.

Applying the principals of “tuned natural aspiration” developed successfully on the Callaway SuperNatural® Corvette ZR1 and LT1-based 400/383, the Callaway Viper 440 Six-Pack enhances the 400 Viper engine’s breathing with improvements to both the intake and exhaust systems. It gives a noticeable improvement in the Viper’s already exciting performance, better throttle response and a more pleasing exhaust note.

The Callaway Viper 440 Six-Pack consists of three elements, each duplicated for each bank of the RT/10 engine:

· High capacity air intake with low restriction air cleaners and laminar flow ducts;
· Port-matched throttle bodies; and
· T304 stainless steel cat-back exhausts with proprietary mufflers.

Installation takes three days at Callaway’s shop in Old Lyme, Connecticut. Each Callaway Viper 440 Six-Pack is test driven to ensure its performance and reliability. Replacement parts, including air filter elements, are readily available from Callaway. The Callaway Viper 440 Six-Pack does not affect the factory warranty from Dodge.

The factory “look” of the Viper is not affected. The cat-back exhaust fits under the stock Viper side pipe covers. Under the Viper hood the only visible change is a pair of mirror-polished 6061-T6 aluminum alloy high-capacity ducts that replace the convoluted stock air ducts between the filter enclosure and the throttle body. Available at the owner’s option is “Callaway 440” identification for the front fender just under the “RT/10” Viper logo.
Attachments
DDG-1995-001, Callaway Materials, CCE00000.jpg
DDG-1995-001, Callaway Materials, CCE00000.jpg (45.57 KiB) Viewed 6816 times
User avatar
Brangeta
11-PSI
11-PSI
Posts: 711
Joined: Wed Aug 27, 2008 11:30 pm
Location: Dallas, TX

Re: Callaway Viper Info:

Post by Brangeta »

Holy crap! 40 horsepower from a cat-back, air intake, and throttle body! I'm impressed! Never knew the throttle body did much if anything to performance. :help
4th Generation Camaro History site:
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com
User avatar
Jeroenvgfn
Site Admin
Site Admin
Posts: 1942
Joined: Thu Aug 28, 2008 2:17 am
Location: Netherlands, Europe
Contact:

Re: Callaway Viper Info:

Post by Jeroenvgfn »

;bow ;bow ;bow

thanks Chris, This is what I have been looking for :thumbs
Callaway Owners Group : Division Europe
Callaway C1 project registry member
User avatar
BIGJOHN
VIP COG Brother
VIP COG Brother
Posts: 2811
Joined: Thu Aug 28, 2008 12:24 pm
Location: Ledyard, CT.

Re: Callaway Viper Info:

Post by BIGJOHN »

Brangeta wrote:Holy crap! 40 horsepower from a cat-back, air intake, and throttle body! I'm impressed! Never knew the throttle body did much if anything to performance. :help
BRANDON,
THE THROTTLE BODYS ON THE EARLY VIPERS; AFTER THE THROTTLE PLATE, THE DIA. GOT SMALLER.
THIS IS HOW THE PORT MATCHED TROTTLE BODYS IMPROVED AIR FLOW.
:beer
User avatar
Brangeta
11-PSI
11-PSI
Posts: 711
Joined: Wed Aug 27, 2008 11:30 pm
Location: Dallas, TX

Re: Callaway Viper Info:

Post by Brangeta »

Oh! Well that makes sense then! :thumb1
4th Generation Camaro History site:
http://sites.google.com/site/brangeta/
Brangeta Design Group
http://www.brangeta.com
Post Reply